Toillet Tank

07 Oct. 20

How it works – toilet tank

All modern toilets consist of two parts: a tank and a bowl. The tank is at the top and contains about two liters of freshwater. The bowl is the lower part where liquid and solid waste is stored. In this two-part series on how toilets work, we look at the features of most portable toilets that are likely to break.

Purpose of the toilet tank

Toilets are so efficient at washing waste thanks to the siphon they create. The standard hot water line is not strong enough to start the soup.

Therefore, a tank is needed. It will take you 30 to 60 seconds to fill the toilet tank between liquids. However, if you press the handle, all water will flow into the toilet in three seconds. In this case, the flushing effect required to operate the bathroom is achieved with each flush.

Inside the toilet tank

Take a look at the functions of the toilet that work together in the tank:

  • Service: the outer part of the tank. Press the handle to start washing.
  • Handle: rotates in the container attached to the handle.
  • Chain: the connection between the handle arm and clasp.
  • Flap: A rubber mechanism that seals the opening of the drain between washes.
  • Liquid valve: a piece attached to the toilet tank door that holds the rubber seal open when water flows into the toilet.
  • Drain hole: part of the pipe that connects the toilet tank to the bowl.
  • Fill valve: A device that fills the tank in preparation for the next wash.
  • Pipe filling: a rubber hose that carries water from the filling valve to the tank.
  • Floating / floating ball filling: some toilets have a floating filling and attach the other part of the float ball to the float manual filling valve.
  • Overflow hose: Safe if the ball is released or the filling valve is blocked. Instead of overflowing the tank, this hose is directing too much water into the bowl.

The Flush

The toilet starts working when you squeeze the handle. The handle arm lifts the attached chain, opens the door, and activates the pull valve.

The Refill

The float/float ball kicks in when the tank is empty, which indicates that the fill valve is starting to water. It causes the filled tube to fill the storage container for the next wash. At the same time, the drain door closes to separate the box. The reservoir fills with water and stops when the swimming ball reaches a certain level. If a ball loosens in the bathtub or the fill valve becomes clogged, the overflow tube acts as a guard and directs excess water into the bowl to prevent the bathroom from overflowing.

The toilet that we all accept today is a technical surprise. However, if any part of the tank toilet fails, you exit the bathroom abruptly. If you need replacement parts for the toilet tank or have trained plumbers to return and use the faulty toilet, call Best Quality Pluming.